How To Fix A Broken Fishing Rod [Master Guide]


Have you broken your fishing rod and wandering what to do with it now? The most important tip that I have got from my father about fishing is not throwing anything away. You never know which equipment will prove to be handy in the future.

We often tend to buy ourselves new things than fixing the broken ones. But repairing fishing gears can be an easy job if you have the right apparatus. You do not have to google fishing rod repairs near me every time you break your fishing gears. You can fix them yourself.

I will tell you how to fix a broken fishing rod tip most easily with little tools. But before that, I will give descriptions of all the eight types of fishing rods available in the market.

Table of Contents

Types of fishing rods:

  1. Spinning rods:

Have you heard of the technique, spin fish? Here, you spin your lure to mimic the prey of the predatory fish. This way, you attract your catch.

It is an easy technique with a simple setup, perfect for beginners. Anglers use spinning rods to do this.

Spinning rods do not have a trigger attachment at their base. They are also a bit lighter compared to the other rods. Another feature to distinguish them from other rods is their guides. The eyelets or guides in spinning rods always point down to the ground.

Spinning rods come in various sizes. The minimum number of eyes on a spinning rod is five, and the maximum is 9. The length of the rod of an angler depends on his height.

  1. Casting rods

There are two types of casting rods in the market baitcasting and spin casting rods. Baitcasting is the more popular one.

In most ways, the baitcasting rods are the polar opposite of spinning rods. Here, the guides are faced upward, which makes the rod bend differently. This feature makes this rod confusing for beginners.

Casting rods can take heavier lures and lines. So, they are used for bigger catches. In baitcasting rods, the anglers have to hold down the line with the thumb. And then release it while flipping the rod forward.

If not done properly, it results in a backlash of tangled fishing lines. Due to this complexity, beginners find baitcasting rods more challenging. However, eventually, it gets easy to use.

  1. Fly Rods

It is the only rod compatible with fly reels and used for fly fishing. They have greater rod flex for which the line can reach high enough to let the lure cast out in the water.

Fly rods come in a variety of lengths, weights, and materials. Typically the length of the rod varies from 6 to 15 feet. The longest ones are used for Salmon or steelhead fishing.

The butt piece is missing in the flying rods which, prevents the tangling of lines while casting. Fly fishing is a challenging technique. It is not suitable for fishing deep. Flying rods are more expensive than spinning or baitcasting rods.

  1. Ultralight Rods

Many young beginners start with this fishing rod. It is lighter and smaller. The shortest rod can be of 4 feet only and the largest of 9 feet. These ultralight rods often result in catching more fishes too.

They are versatile and used in techniques like trolling and fly fishing. These rods are pointed upward, so they use a different technique to fight fish. These rods tire the fish than thrashing them out.

One of the biggest problems with these rods is finding light reels compatible with them. They are not as easy to find as the popular spinning or baitcasting reels.

  1. Telescopic Rods

They are not the rods for newbies. These rods are the dream of every experienced angler. It is better to use this rod after mastering the spinning technique.

The best feature of it is how easily transportable it is. When closed, they are only one to two feet long but can be extended to 20 feet!

They are easy to assemble and made of the same materials as spinning and baitcasting rods. They are super flexible but do not have eyes. These rods are perfect for surf fishing.

  1. Trolling Rods

These rods are specially designed for trolling. This technique is different from others due to the moving vessels or boats.

This technique is generally used in deep fishing. Therefore, it requires heavy-duty equipment. Unlike popular techniques like spinning and casting, trolling requires more durable handles and strong fishing lines.

Trolling rods have longer handles to ensure a tight grip. These rods are quick, thin, and sturdy. Casting rods can also do trolling well. But they are mostly used in winter when the fishes are not spread too much.

  1. Surf Rods

As you can say from the name, these rods are used for sea fishing. Surf fishing is super fun and exciting.

It requires long and flexible rods to catch fish in that current. And that is precisely what a surfing rod is. Surf fishing requires a heavy sinker to catch fish at that wave. So, surf rods are thick and durable. They have sand spikes or rod holders.

Anglers can use these rods at coastlines to catch sea fish. They do not need to use a boat like in the trolling technique.

  1. Ice Fishing Rod

These rods are specially designed for fishing through holes. They are the smallest in length and range from 2 to 3 feet.

For smaller lengths, they have fewer guides. They have wooden handles. They have smaller tips to feel the bite of the fish better.

This rod does not require any reel. So, it saves you some penny.

Now that we know all about fishing rods, it is time for fishing rod repair. As I have said earlier, repairing a broken fishing rod is not a tough job. You just need the required tools and some time. Make sure you do not have to leave in the middle of repairing. That might hurt the final result.

There are a lot of parts in the fishing rod that can get damaged like, the guide, handle, or tip. You can break the fishing rod itself too. But you will be happy to know all of them are repairable.

Here I will tell you how to fix a broken fishing rod tip.

Fishing Rod Tip:

It is composed of two parts, tip-top, and the tip.

The tip of the rod is the farthest point from the handle. The tip-top is the metal guide at the very top of the rod. It is the smallest part of the rod and is easily breakable. You cannot reel a line past this point on the rod. Tip-top is a part of the tip.

The tip is the upper part of the rod. This area of the rod is the most flexible. It is made of graphite or fiberglass.

Fishing Rod Repair

As I have said earlier, the tip-tops are easily breakable. But, they are also easy to repair.

5 steps fishing rod tip replacement:

  1. Firstly, check your tip-top style. It depends on your fishing rod. There are three types of them spin/cast top, boat top, or fly top.
  2. Measure your ring size in millimeters.
  3. Next, find the tube size. It is measured as the 1/64th of an inch. The size of a common tube is 3.5, which means 3.5/64th of an inch.
  4. Find or order a replacement. If you have a tip-top of sam size from an older rod, you can use it. You cannot find then you can order one.
  5. After you have got the new tip-top, it is time to install it. You will need a tip-top glue, a razer, a plier, and a lighter.

Cut off a small sliver of the glue. Make sure it is small enough to drape inside the tip-top. Now hold the tip-top gently with the plier and heat it slightly with the lighter. It should melt the glue enough.

Slide the tip-top over the tip of the blank and give a 360-degree turn. This will ensure a strong adhesive bond. Leave it until it completely hardens.

Now, for the tip, you will need a ferrule. It is used as a bandage to join two pieces together.

  1. First, you have to cut the tip with a saw or clippers to make sure you have a nice clean break. Sand down the edge so it sits nicely against the new tip.
  2. Put some hot glue inside the ferrule of the new tip and twist it over the sanded broken area. Make sure there is enough glue that it’s dripping out from the broken area. This creates an excellent seal, and you can wipe off any excess.

Put some hot glue inside the ferrule of the new tip. And twist it over the sanded broken area. Make sure there is enough glue that it’s dripping out from the area, this creates an excellent seal, and you can wipe off any excess.

  1. Hold the two pieces in place until the glue sets and store the rod vertically, so it dries appropriately. Once everything is dry, sand off any excess glue.

Conclusion:

Repairing a broken rod tip is pretty straightforward and easy to do. Old fishing rods can be of great help in this process. So, take care of your old fishing rods as well, as you do not know when they prove to be handy.

You can follow this step-by-step guideline on how to fix a broken fishing rod tip. The steps are super easy, and you also do not need much of an ingredient.

Be careful while using your fish rods, especially the tips, as they break off easily. But even if you break, you can follow these steps to repair them in no time!

Recent Posts